POSITION CONTROLLERS

THESI 320 – Two-axis position controller

THESI 320 position controller can control shifting and positioning of two axis in 3 different operating modes:
- MANUAL, by keyboard;
- SEMI-AUTOMATIC, by keyboard;
- AUTOMATIC, on the basis of a memorized program.
End of program output.
3 generic auxiliary inputs.
Possibility of storing up to 99 PROGRAMS with 20 positions each. Up to 99 repetitions can be matched to each position
(the program cycle is composed by the position and its respective repetitions).
90 Vac to 230 Vac power supply or 24 Vac power supply with selector.
Manufactured with 16 bit microcontroller, 256K FLASH and 8K RAM memory in single-chip mode.
Optoisolated inputs:
START, STOP, INCREASE CYCLE, DEVIATION, PRESET.
Voltage-free contact outputs:
ENABLING WITH CONTROL INTERLOCK, OK POSITION, FEED / BACK, SLOW / FAST.
± 10 Vdc analog outputs:
FEED / BACK, SLOW / FAST, with linear ramp.
Possibility of installation on bench or built in.

Display	POSITION: 6 high-efficiency digits h = 13 mm and negative sign CYCLES / PROGRAMS: 2+2 high-efficiency digits h = 13 mm
Encoder input signals	2 square waves with phase displacement of 90° ± 10° and zero ref. 5 Vdc or 12 Vdc
Axis input frequency	20 kHzMAX
Linear resolution	200 – 100 – 50 – 20 – 10 – 5 – 2 – 1 μm
Protection class	keyboard IP 65 rear panel IP 40
Power	10 WMAX
Power supply	90 to 230 Vac ± 10% – 50/60 Hz 24 Vac ± 10% – 50/60 Hz
Digital outputs	N.O. relay contacts
Inputs	optoisolated
Connections	by removable terminal block
Dimensions	front panel: 193×100 mm – depth: 135.5 mm
Download Brochure

Display	POSITION: 6 high-efficiency digits h = 13 mm and negative sign CYCLES / PROGRAMS: 2+2 high-efficiency digits h = 13 mm
Encoder input signals	2 square waves with phase displacement of 90° ± 10° and zero ref. 5 Vdc or 12 Vdc
Axis input frequency	20 kHzMAX
Linear resolution	200 – 100 – 50 – 20 – 10 – 5 – 2 – 1 μm
Protection class	keyboard IP 65 rear panel IP 40
Power	10 WMAX
Power supply	90 to 230 Vac ± 10% – 50/60 Hz 24 Vac ± 10% – 50/60 Hz
Anlog output	± 10 Vdc optoisolated
Inputs	optoisolated
Connections	by removable terminal block
Dimensions	front panel: 193×100 mm – depth: 135.5 mm
Download Brochure